Stainless steel snap closures with handle, retractable
These snap fasteners are designed for flush mounting in doors, hatches and hoods thanks to their recessed handle.
Available in two different sizes for leaves of different thicknesses. Increased security thanks to lockable versions. The lock is identical, each lock can be opened with the same key.
Pre-tensioned handle prevents slamming.
Max torque for tightening the screws: 2.4 Nm.
Form A: lockable
Form B: non-lockable
Material: Stainless steel 1.4401. Finish: ground and polished or matt shot-blasted. Instructions for use: By pulling the handle, the closure is brought to the open position, allowing the door to be opened. Locking is automatically ensured by closing the door. The closure can also be operated from the rear. Use: - Automotive industry
- Machine construction
- Boats and shipbuilding
- Aerospace
- Motorhomes and caravans
- Medical technique Assembly: 1. Make the cut according to the sketch.
2. Attaching the mounting bracket.
3. Attachment from the rear using mounting hardware. Scope of delivery The mounting bracket as well as suitable screws (M4) and mounting brackets are included.
Lockable snap closures come with 2 keys.
Screws (M5) for mounting bracket are not included. Drawing indication:
2) Frame
3) Handle
4) Mounting bracket
5) Height of mounting bracket (see table H7)
6) Mounting cutout
![NORELEM](https://www.industrie-online.com/uploads/suppliers/logo/md_6825eeb8-31f3.png)