Steel or stainless steel indexing pin with plastic eyelet handle
Indexing fingers are used when it is necessary to prevent movement of the stopping position due to transverse forces. The indexing finger is unlocked by pulling the button.
Matter :
Steel model:
Threaded socket 1.0715.
Stop finger 1.4305.
Stainless steel model:
Threaded socket 1.4305.
Stop finger 1.4305.
Eyelet handle in dark gray RAL 7021 or traffic red RAL 3020 thermoplastic.
Finish: Steel version:
Untreated finger, blue passivated zinc-plated threaded body.
Natural stopping finger.
Stainless steel version:
Untreated finger.
Other parts in natural stainless steel. Note: If disengagement must be carried out over a longer period and it is necessary to avoid a return of the stop finger, form C or form D should be used.
During assembly, the maximum tightening torque must be observed. noted. On request: Other trips possible on request. Drawing indication:
Form B: without locking notch, with locknut
Form C: with locking notch, without locknut
Form D: with locking notch, with locknut
![NORELEM](https://www.industrie-online.com/uploads/suppliers/logo/md_6825eeb8-31f3.png)