Support for surface elements (multibloc 25) type B and type I

The brackets allow surface elements to be easily fixed to aluminium profiles.

This bracket can be pivoted to any position in the profile groove. Plastic surface elements (acrylic glass, composite panels) or lightweight cladding panels can be mounted on this bracket. To do this, the surface elements must be provided with a hole through which they are screwed to the bracket. The nut in the bracket can be moved through an oblong hole, which allows for some compensation of tolerances.

Additional spacers can be attached to the bracket. Different spacings from the edge of the profile are thus provided to allow surface elements of different thicknesses to be screwed flush with the aluminium profile.