Safety switch CES-C07

The CES-C07, the latest addition to EUCHNER's non-contact safety switches, offers a much more comprehensive diagnostic function. Providing relevant parameters for the process in real time, this switch is a real ally for preventive maintenance. It can indicate relevant ambient parameters, attempts at abusive manipulation, risks of failure… Category 4 and Ple the CES-C07 switch offers three directions of attack, thus allowing a wide combination of fixing. The connection is made using an M12 connector directly mounted on the switch. It is equipped with clearly visible LEDs indicating the different states and for example the position at the edge of the zone. In combination with the ESM-CB safety module, all diagnostic information is automatically collected for each switch and transmitted to your control system via IO-Link. It is possible to integrate mechanical safety switches in the series connection of CES devices. With a width of 18 mm, the CES-CB is more than a safety relay. It has 2 safety input circuits. In addition to information feedback to IO-Link, it offers 2 redundant safety relay outputs for directly switching loads up to 6 A!