Form clamping vice for external clamping

The contour of the part to be clamped is inserted into the collet.

The engraved number of degrees allows you to always obtain the same tightening torque, even without a torque wrench, to tighten the part safely.

The clamping stroke of collet 03166-10-01910 is 0.025 mm per 15° rotation in the radial direction. The recommended clamping stroke is 0.07 mm. The maximum permitted clamping stroke is 0.38 mm.
The clamping stroke of collet 03166-10-04950 is 0.05 mm per 15° rotation in the radial direction. The recommended clamping stroke is 0.1 mm. The maximum permitted clamping stroke is 0.64 mm.

The positioning collar allows precise adjustment.