GINDRE

Flat and round wires

Description

ROUND WIRES IN BUNDLES :

Diameters from 4 to 10mm.

Inside diameter of boot : 400 and 500mm.

Outside diameter of boot : from 800 to 1200mm.

Boot width : if inside diameter 400mm then width from 250 to 300mm. If inside diameter 500mm then width 250mm only.

SQUARE AND HEXAGONAL WIRES :

On request.

FLATS IN BOOTS:

Widths from 10 to 32mm.

Thicknesses from 2 to 7mm.

Sections up to 200mm².

Inside diameter of boot : 400 and 500mm.

Outside diameter of boot : from 800 to 1200mm.

Boot width If inside diameter 400mm, then width from 250 to 300mm. If inside diameter 500mm then width 250mm only.

FLAT ROLLED PRODUCTS :

Widths from 25 to 200mm.

Thicknesses : de 2.5 à 8mm. (< 2,5 mm et > 8mm, sur étude)

Sections up to 1440mm².

Inside diameter of boot : 400, 500 or 550mm.

Outside diameter of boot : up to 1200mm (1300 without annealing).

FLATS STRETCHED INTO ROLLS :

Widths from 20 to 120mm.

Thicknesses from 2 to 10mm.

Sections up to 1440mm².

Roll diameters (inside and outside) : to be studied according to product section.

GINDRE

Materials

Description

Factory established since 1823 in Pont-de-Chéruy (France), we transform non-ferrous metals with passion. Through the industrial revolution and until the advent of electricity, a new world opened up and revealed copper as the essential metal for the electrical industry. Since the middle of the 20th century, we have focused our activities around t...