MOTO-COCCI winding machine

To make wreaths
To wind on a small reel (maxi 100kg and Ø 850mm)
Cables Ø max. 50 mm

Gavette for making wreaths
The gavette, removable, is quickly mounted in place of the reel.
2 models of gavettes to choose from.
The 2 gavettes have an outside diameter of 750 mm.
They are made of galvanized steel.
Light and easy to handle outer flange (in aluminium).
Cable end quick release system.
Openwork gavette to simplify the tying of the crown.
The width is adjustable in 3 positions: 130/180/230 mm.
The drum is made up of 4 blades.
It is the adjustment of the barrel diameter that distinguishes the 2 gavettes.

ADJUSTABLE Gavette
The diameter of the barrel is adjustable by screwing (2 screws on each of the 4 blades), on 7 positions: 190/240/290/340/390/440/490 mm.
Code GR750MC

QUICK ADJUST Gavel
Each blade is equipped with an indexable finger which allows:
- tool-free adjustment of the inside diameter in 4 positions: 330/440/560/670 mm
- very easy extraction (“removal”) of the crown.
Code GRR750MC

Movable machinery
To be able to work in front of a reel rack.
2 fixed wheels with brake, parallel to the rack, and 2 swivel wheels.
With its large maneuvering bar at the rear, the MOTO-COCCI is very easy to handle.
In addition, sheaths are provided for forklift forks.

Quantity surveyor on trancannage bench
M50 measuring device for cable max. diameter 50 mm, with 50cm development measuring wheel in polyurethane, and encoder.
A handle locks the measuring wheel in the high position to facilitate the introduction of the cable.
The measuring device, equipped with 4 guide rollers at the front and at the rear, is mobile on a shearing bench, so as to properly arrange the turns of cables next to each other.
The electronic counter is double programmed: slowing down, then stopping at the chosen length.

Touch screen
All machine functions are controlled from the touch screen, which is intuitive and easy to use.
4.3'' screen (129x103 mm), IP65 front panel.
Administrator mode and user mode.

Motorization
Gear motor: 0.75 kW
Frequency converter:
- variable speed from 0 to 100 rpm
- programmed acceleration ramp
- torque limiter.
230V single phase 50Hz

MANUAL SLICING version
Thanks to the handle placed on the measuring device, the operator manually performs the to-and-fro movement.

Model without gavette: code E3040

SEMI-AUTOMATIC SLICING version
The measuring device carriage is motorized. The carriage speed is servo-controlled on the winding and fine-tuned by a potentiometer.
Comfort option (presence of the operator essential).

Model without gavette: code E3040TSA

Options: see technical sheet