Stainless steel fixing pins with stainless steel operating button

Matter :

Stainless steel body and push button.

Finishing :

Polished body and push button.

Note :

Mounting option for plates with thickness 3 - 12 mm.

Use a base plate made of hard material, such as stainless steel.

If the holding force is exceeded, a gap of more than 0.1 mm is observed between the plates.

Instructions for use :

Turn the fixing pin in the screw plate until the thread is visible on the other side.

Press the button and insert the fixing pin into the pre-machined base plate.

Turn the fixing pin in the other direction until the two plates are assembled, then lock with the locknut.

Drawing indication:

1) Screw plate

2) Base plate