Automatic 2-axis CNC band saw - ERGONOMIC 290.258 DGA

For straight and angled cuts at 45° ( left and right ) and up to 60° on the right.

Entirely streamlined machine mounted on a mechanically welded frame.
With hydraulic unit and lubrication device with tank and lubricant pump.

This machine is equipped with:

• Non-switchable 400 V TRI motor, power 1.5 kW, cutting speeds from 20 to 120 m/min.
• Electronic speed variator.
• Cast iron saw bow.
• Hydraulic cylinder ensuring the lowering and raising of the saw arm, with cutting force sensor on the back of the band.
• Material detection feeler when lowering the sawing head for automatic change from rapid approach to working speed.
• Hydraulic clamping vice automatically moving from left to right of the plate thanks to a hydraulic cylinder.
• The hydraulic vice of the bar advance ( mounted floating ) moves on 2 round columns and is driven by a toothed belt and a motor ( reading of the length on a magnetic ruler ).
• Machine stop device at the end of the bar or in the event of a loose bar.
• Ribbon tension indicator.
• 1500 mm long bar advance and multiple stroke repetition.
• Automatic pivoting of the saw head in connection with the bar advance ( pivoting by chain + electric motor, locking in position by hydraulic cylinder ).
• CNC control panel allowing different lengths to be programmed in the same bar. To each cutting length is attached a number of pieces and 2 pivoting angles of the head and a quantity of pieces.

Cutting capacities:

• Straight cut: Ø 258 mm - 325 x 180 mm - 250 x 258 mm - 258 x 258 mm.
• Bevel cut 45° to the right: Ø 210 mm - 215 x 100 mm - 180 x 250 mm - 195 x 195 mm.
• Bevel cut 45° to the left: Ø 180 mm - 235 x 80 mm - 145 x 245 mm - 165 x 165 mm.
• 60° bevel cut on the right: Ø 125 mm - 135 x 100 mm - 115 x 125 mm - 125 x 125 mm.

Tape dimension: 2910 x 27 x 0.9 mm.

Working height: 755mm.
Minimum cutting Ø: Ø 5 mm.
Minimum bar end length: 280 mm.

Dimensions ( L x W x H ): 2900 x 1850 x 1650 mm.

Machine weight: 1500 Kg.