Expanding clamping chuck

-Thanks to the shape clamping mandrel, it is sufficient to machine the vice according to the shape to be clamped. Extremely reliable, the chuck ensures secure clamping with high clamping force (30kN). In addition, the mechanical clamping and the unclamping with compressed air allow a minimum of handling, and a change of assembly of the fastest. The clamping depth can be very low, clamping is ensured from 1mm heel.

Form clamping vice with base plate for mounting on frame plates with 50 mm frame pitch. The flange plate can accommodate collets for outside clamping as well as collets for inside clamping. The contour of the part to be clamped is installed in the collet. Free-form surfaces and asymmetrical contours are possible.
The integrated spring pack generates a clamping force of 5.8 kN. By retightening with compressed air, the clamping force can be increased to 43.5 kN. The clamp is released by injecting compressed air onto the lower surface of the cylinder. The cylinder is then pushed upwards and thus cancels the clamping process of the collet chuck.

Clamping range 0.2mm.
Repeat accuracy < 0.01 mm.