Inductive detectors with radio transmission RF 96 IS

STEUTE brings a new ease of wiring for the detection of moving parts, thanks to the inductive sensors with RF 96 IS radio transmission.

In their basic version, these sensors are offered in M8, M12, M18 or M30 diameters, embeddable or non-embeddable, with a short cable connection to a transmitter module, compact and robust. Powered by a long-lasting battery (2 to 5 years depending on frequency of use), the transmitter module transmits all-or-nothing information according to the Enocean radio protocol, to a receiver installed in an electrical cabinet. During a change of state on the detector side, a coded radio signal is sent to the receiver, which reproduces this change by switching the outputs.

Steute offers several models of receivers, in single-channel, two- or four-channel versions, with static outputs or changeover dry contacts , also RS232. The useful range is 50m indoors and up to 200m outdoors , free field/direct vision. The RF RxT repeater doubles the useful distance. Inductive radio sensors from steute ensure reliable transmission in industrial environments, whether close to reflective surfaces or in the middle of other radio systems.

• No wiring, no cable tray,
• Proven system for industrial environment
• Inductive sensors without contact diameter M8, M12, M18 or M30
• Radio transmission by remote module (range 50 to 200m)
• Low consumption, long battery life (2 to 5 years depending on use)
• Receivers with RS232 output or 1-channel / 2-channel / 4-channel relay
• Very good sealing (IP67), good resistance to humidity
• Available in ATEX version

AREAS :

- All industries,

- Conveying, handling,

- Agrifood,

- Chemistry, Pharmaceuticals,

- Petrochemicals,

- Maritime, port.